Skip to content

Latest commit

 

History

History
33 lines (25 loc) · 1.22 KB

README.md

File metadata and controls

33 lines (25 loc) · 1.22 KB

wizfs

A 9Front file server for interacting with Philips Wiz light bulbs by adventuresin9

This uses json.h which is available in 9Front.

usage: wizfs -m "mount point" -s "srv name" -d (set debug true)

The defaults are to mount "wiz" in /n, and post "wizfs" to /srv.

The commands that can be sent to the bulbs;

on : sends "state":true to turn the bulb on off : send "state":false to turn the bulb off pulse: uses the pulse method to make the bulb dim for half a second

All other commands have to be sent as a key=value pair. Known working options are:

state=(0 or 1)(false or true) turns the bulb off or on r=(0-255) for the red LED g=(0-255) for green b=(0-255) for blue c=(0-255) for cool white w=(0-255) for warm white temp=(2200-6500) for warm to cool white light dimming=(10-100) dims the bulbs sceneId=(0-32) sets one of the prepackaged "scenes", note the capital I in Id. speed=(0-200) used for sceneId that cycles through colors, makes is go faster or slower

Sometimes the bulb will send back an error if the value is outside a given range. Other times it will report success, but the value might be looped back around to 0. Like, b=265 looks like b= 10. So bits over a certain value may be truncated by the bulb.