chocolatte-v3.yaml

points:
  key:
    padding: cx
    footprints:
      choc:
        type: choc
        nets:
          from: =name
          to: GND
        params:
          keycaps: true
          reverse: true
      diode:
        type: diode
        params:
          tracks: true
        anchor:
          shift: [-8.25, 0]
          rotate: 90
        nets:
          from: =name
          to: unknown
      leds:
        type: rgb
        anchor:
          shift: [0, -5]
        nets:
          din: unknown
          dout: unknown

  zones:
    matrix:
      columns:
        outer:
          rows:
            top:
              bind: [9, 0, 0, 0]
        pinky:
          # spread: cy+2.5
          stagger: 2
          rows:
            top:
              bind: [7, 0, 0, 0]
            bottom:
              bind: [0, 0, 2, 0]
        ring:
          # spread: cy+2.5
          stagger: 4
          rows:
            top:
              bind: [3, 0, 0, 0]
            bottom:
              bind: [0, 0, 6, 0]
        middle:
          # spread: cy+2.5
          stagger: 3
          rows:
            bottom:
              bind: [0, 0, 9, 0]
        index:
          # spread: cy+2.5
          stagger: -2
          rows:
            top:
              bind: [2, 0, 0, 0]
        inner:
          # spread: cy+2.5
          stagger: -2
          rows:
            top:
              bind: [4, 0, 0, 0]
      rows:
        bottom:
        home:
        top:
    thumbfan:
      anchor:
        ref: matrix_inner_bottom
        shift: [-18, -20]
      columns:
        near:
        home:
          spread: cx+5
          stagger: -4
          rotate: -20
        far:
          spread: cx+5
          stagger: -4
          rotate: -20
      rows:
        thumb:

outlines:
  exports:
    keys:
      - type: keys
        side: left
        size: 14
        bound: false
    keycaps:
      - type: keys
        side: left
        size: [18, 17]
        bound: false
    plate:
      - type: keys
        side: left
        size: 25
        corner: 3
    promicro_space:
      - type: rectangle
        anchor:
          - ref: matrix_middle_top
            shift: [22, (cy/2) + 4 ]
            rotate: 270
        size: [82,57.65]
        corner: 3
    fill_notch:
      - type: rectangle
        anchor:
          - ref: thumbfan_far_thumb
            rotate: 40
            shift: [4,5.1]
        size: 10
    merged:
      - type: outline # keys
        name: plate
        fillet: 3
      - type: outline
        name: promicro_space
        operation: add
      - type: outline
        name: fill_notch
        operation: add

    pcb_edgecut:
      - type: outline
        name: merged
        fillet: 3

cases:
  chocolatte_plate:
    - name: merged
      operation: add
      extrude: 1
    - name: keys
      operation: subtract
      extrude: 3

# VIA footprints may be needed to jump between layers to avoid obstacles
# Use Blackpill controller to avoid having to leverage a diode matrix
# Potential for support MakerDiary m.2 bluetooth adapter https://wiki.makerdiary.com/nrf52840-m2
# USB-C Controller
# TRRS between halves
# Ability to make either halve master/slave pair
# Support for millmax hotswap sockets
# Support for Kailh hotswap sockets (default support in ergogen)
# Support for sk6812mini-e leds for easier soldering
# Support for Roller encoder, 1/side (EVQWGD001) (default support in ergogen)
# Support for Nice!View
pcbs:
  cholatte:
    outlines:
      pcb_outline_name:
        outline: pcb_edgecut
    footprints:
      - type: rotary
        params:
          reverse: true
        anchor:
          - ref: matrix_inner_bottom
            shift: [20, -12]
            rotate: -30
        nets:
          to: undefined
          from: undefined
          A: undefined
          B: GND
          C: undefined

      - type: trrs
        anchor:
          - ref: matrix_inner_bottom
            shift: [32, 8]
            rotate: -90
        nets:
          A: GND
          B: GND
          C: D2
          D: VCC

      #      - type: oled # 4 pin oled; need to find 5pin footprint
      #        anchor:
      #          - ref: matrix_inner_top
      #            shift: [50, 0]
      #            rotate: 90
      #        nets:
      #          SDA: undefined,
      #          SCL: undefined,
      #          VCC: undefined,
      #          GND: undefined,
      #
      #      - type: rgb
      #        anchor:
      #          - ref: matrix_inner_top
      #            shift: [75, 0]
      #        nets:
      #          dout: undefined,
      #          din: undefined

      - type: promicro
        anchor:
          - ref: matrix_inner_home
            shift: [20, 15.5]
            rotate: -90
        nets:
          P1: matrix_outer_bottom
          P2: matrix_outer_home
          P3: matrix_outer_top
          P4: matrix_pinky_bottom
          P5: matrix_pinky_home
          P6: matrix_pinky_top
          P7: matrix_ring_bottom
          P8: matrix_ring_home
          P9: matrix_ring_top
          P10: matrix_middle_bottom
          P11: matrix_middle_home
          P12: matrix_middle_top
          P13: matrix_index_bottom
          P14: matrix_index_home
          P15: matrix_index_top
          P16: matrix_inner_bottom
          P17: matrix_inner_home
          P18: matrix_inner_top
          P19: matrix_thumbfan_near
          P20: matrix_thumbfan_home
          P21: matrix_thumbfan_far