matrix

Connectivity Matrix

The matrix page on the website shows the connectivity matrix. The connectivity matrix indicates the networks that each group:

• can reach with a valid AS-level path (green);
• can reach with an invalid AS-level path (orange);
• cannot reach (red).

We determine reachability by sending periodic pings between all networks, if the ping succeeds, we consider the AS reachable. In addition to the ping, we compare the BGP looking glass outputs with the project topology to determine whether the path between two ASes is valid, i.e. if it does not violate any policies.

The source and destination hosts used for the ping can be configured in the l3_routers.txt configuration file (with the MATRIX and MATRIX_TARGET parameters).

Turn on the connectivity matrix

By default, the matrix does not run. This is the default behavior because the matrix requires sending regular pings which might increase the load on the server.

The pings used by the matrix are sent from a MATRIX container that is connected to every AS. the l3_routers.txt configuration file indicates to which router in every group this container is connected to. Only the instructor can access the MATRIX container, from the server with:

docker exec -it MATRIX bash

To start the ping and turn on the matrix, just run the following script (we recommend to run it from a tmux session so that it never stops):

cd /home
python ping.py

The resulting connectivity file (/home/connectivity.txt) is thus processed by the WEB container to print the connectivity matrix.