diff --git a/arch/arm/dts/rk3399-pinebook-pro-v1.dts b/arch/arm/dts/rk3399-pinebook-pro-v1.dts new file mode 100644 index 00000000000..750f2f296fb --- /dev/null +++ b/arch/arm/dts/rk3399-pinebook-pro-v1.dts @@ -0,0 +1,562 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include +#include +#include "rk3399.dtsi" + +/ { + model = "Pine64 Pinebook Pro"; + compatible = "pine64,pinebook-pro", "rockchip,rk3399"; + + chosen { + stdout-path = &uart2; + }; + + aliases { + spi0 = &spi1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pwms = <&pwm0 0 740740 0>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + }; + + vcc5v0_usb3_host: vcc5v0-usb3-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_usb3_drv>; + regulator-name = "vcc5v0_usb3_host"; + regulator-always-on; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_usb3_drv: host-usb3-drv { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; +}; + +&sdmmc { + u-boot,dm-spl; + bus-width = <4>; + status = "okay"; + max-frequency = <20000000>; +}; + +&sdhci { + u-boot,dm-spl; + bus-width = <8>; + max-frequency = <25000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + /delete-property/ clocks; + /delete-property/ clock-names; + + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + /delete-property/ clocks; + /delete-property/ clock-names; + + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart2 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&dwc3_typec0 { + status = "okay"; + maximum-speed = "high-speed"; +}; + +&usb_host0_ehci { + /delete-property/ clocks; + /delete-property/ clock-names; + + vbus-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host0_ohci { + /delete-property/ clocks; + /delete-property/ clock-names; + + vbus-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host1_ehci { + /delete-property/ clocks; + /delete-property/ clock-names; + + vbus-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb_host1_ohci { + /delete-property/ clocks; + /delete-property/ clock-names; + + vbus-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&dwc3_typec1 { + vbus-supply = <&vcc5v0_host>; + status = "okay"; + maximum-speed = "high-speed"; +}; + +&spi1 { + u-boot,dm-spl; + status = "okay"; + + spiflash: spi-flash@0 { + u-boot,dm-spl; + #address-cells = <0x1>; + #size-cells = <1>; + compatible = "spi-flash"; + reg = <0x0>; + spi-max-frequency = <25000000>; + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + loader@8000 { + label = "loader"; + reg = <0x0 0x3F8000>; + }; + + env@3f8000 { + label = "env"; + reg = <0x3F8000 0x8000>; + }; + + vendor@7c0000 { + label = "vendor"; + reg = <0x7C0000 0x40000>; + }; + }; + }; +}; diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts b/arch/arm/dts/rk3399-pinebook-pro.dts index 750f2f296fb..0f30ff40f1d 100644 --- a/arch/arm/dts/rk3399-pinebook-pro.dts +++ b/arch/arm/dts/rk3399-pinebook-pro.dts @@ -23,7 +23,7 @@ backlight: backlight { compatible = "pwm-backlight"; - enable-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pwms = <&pwm0 0 740740 0>; brightness-levels = < 0 1 2 3 4 5 6 7 @@ -74,7 +74,7 @@ * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; // TODO? }; vcc1v8_s0: vcc1v8-s0 { @@ -115,7 +115,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc5v0_host"; @@ -124,7 +124,7 @@ vcc5v0_usb3_host: vcc5v0-usb3-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_usb3_drv>; regulator-name = "vcc5v0_usb3_host"; @@ -393,17 +393,17 @@ pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { host_vbus_drv: host-vbus-drv { - rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; host_usb3_drv: host-usb3-drv { - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/board/rockchip/pinebook_pro_rk3399/pinebook-pro-rk3399.c b/board/rockchip/pinebook_pro_rk3399/pinebook-pro-rk3399.c index fa9d70da4fd..246959d6eac 100644 --- a/board/rockchip/pinebook_pro_rk3399/pinebook-pro-rk3399.c +++ b/board/rockchip/pinebook_pro_rk3399/pinebook-pro-rk3399.c @@ -23,15 +23,15 @@ DECLARE_GLOBAL_DATA_PTR; #define RK3399_CPUID_OFF 0x7 #define RK3399_CPUID_LEN 0x10 -static int fix_usb2_vbus_pull_mode(void) +static int fix_lcd_backling_pull_mode(void) { #include -#define GRF_BASE 0xff770000 +#define PMU_GRF_BASE 0xff320000 - // set pull of GPIO4_D2 - struct rk3399_grf_regs * const grf = (void *)GRF_BASE; - rk_clrsetreg(&grf->gpio4_p[3], 3 << 4, 0 << 4); + // set pull of GPIO1_A0 + struct rk3399_pmugrf_regs * const pmugrf = (void *)PMU_GRF_BASE; + rk_clrsetreg(&pmugrf->gpio1_p[0], 3 << (2 * 0), 0 << (2 * 0)); return 0; } @@ -62,7 +62,7 @@ int board_init(void) debug("%s: Cannot enable boot on regulator\n", __func__); } - fix_usb2_vbus_pull_mode(); + fix_lcd_backling_pull_mode(); out: return 0;