Nogasm

This is a fork of the original nogasm project.

Hardware

Board

Count	Name	Digikey link	Comment
1	Teensy LC	https://www.digikey.com/short/31cn1n
13	WS2812b RGB LED	https://www.digikey.com/short/31c04r
1	MP3V5050GP	https://www.digikey.com/short/31c04n
1	PEL12T-4225S-S1024 (COM-10982 encoder, backlit)	https://www.digikey.com/short/31cn19
1	COM-10597 (encoder knob, transparent)	https://www.digikey.com/short/djdq9jpq
1	MCP6001RT-I/OT	https://www.digikey.com/short/31cnvz
1	CGRA4004-G	https://www.digikey.com/short/31c0mw
1	BUK92150-55A	https://www.digikey.com/short/31cnvb
3	MMBT2222A	https://www.digikey.com/short/bmf4f7fn
1	LM7805CT/NOPB	https://www.digikey.com/short/wcn5wvbh	SMD versions more common now
2	10µF 20V tantalum cap 1206	https://www.digikey.com/short/4pf7p859
15	1µF 16V ceramic cap 0805	https://www.digikey.com/short/31cdcp
1	0.33µF 16V ceramic cap 0603	https://www.digikey.com/short/31cdt4
3	10nF 16V ceramic cap 0805	https://www.digikey.com/short/31cd7f
1	10k Ohm trimmer	https://www.digikey.com/short/31cnvv
1	15k Ohm resistor 0805	https://www.digikey.com/short/31c04h
2	10k Ohm resistor 0805	https://www.digikey.com/short/31cdt9
2	750 Ohm resistor 0805	https://www.digikey.com/short/31cdtw
1	300 Ohm resistor 0805	https://www.digikey.com/short/31c04q
2	180 Ohm resistor 0805	https://www.digikey.com/short/31cdtn
1	4pos DIP switch	https://www.digikey.com/short/31cn1m
1	Barreljack socket 1.3mm/3.5mm	https://www.digikey.com/short/31c0mt
1	Barreljack plug 1.3mm/3.5mm	https://www.digikey.com/short/31c0mj
1	Barreljack socket 2.5mm/5.5mm	https://www.digikey.com/short/31c0mh

You can order all of the above parts in one cart from Digikey

Aisler Kit

You can order PCBs and/or all parts as a single kit on Aisler

Power

You'll need 12V/1.5A DC power supply with a 2.5mm/5.5mm barreljack plug (or fitting to above bigger socket).

Vibrator

The case is designed for a RS-555 motor. Aliexpress lists several versions. You'll need to press a weight onto it.

Other 12V DC toys controlable with PWM and using up to 2A should work as well.

Plug

An inflatable buttplug is used for pressure detection. For example "Fanny Hill" by Seven Creations.

Software

Flashing the teensy

Install the Teensy Loader Application. After There are two ways to get the firmware onto the device:

Flashing the compiled .hex

This is the easiest way. Download the .hex file and use the loader to upload the file to the device.

Compiling the code yourself

Download and install Teensyduino. Afterwards get the sourcecode, compile and upload it via the arduino IDE.