Skip to content

OpenOverlayRouter/oor

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Overview

The Open Overlay Router (OOR) project aims to deliver a flexible and modular open-source implementation to deploy programmable overlay networks. It leverages on encapsulating overlay-specific packets into underlay-compatible packets at the edges of the instantiated overlay and route them over the physical underlying infrastructure. In order to do so, it maps overlay identifiers to underlay locators and keeps those mappings updated over time. In the current version, OOR uses the LISP protocol for the control-plane (e.g. mapping retrieval and updating, etc), NETCONF/YANG for the management-plane (e.g. overlay identifiers provisioning, etc) and can use both LISP and VXLAN-GPE headers for encapsulation.

Most of the OOR architecture revolves around the LISP protocol and its components, that we introduce briefly here. The Locator/ID Separation Protocol (LISP) is an IETF protocol (RFC6830) that decouples the semantics of identity and location on current IP addresses. It uses the concept of Endpoint IDentifiers (EIDs) to name hosts in edge networks, and Routing LOCators (RLOCs) for nodes in transit networks. EIDs and RLOCs are syntactically indistinguishable from current IPv4 and IPv6 addresses, enabling backwards compatibility with the existing Internet architecture. A distributed database, the Mapping System, is responsible for maintaining the associations between EIDs and RLOCs. LISP Mobile Node (LISP-MN) is a specification to enable fast host mobility using LISP. For convenience, OOR uses terminology borrowed from the LISP protocol and thus uses the term EID for the overlay identifiers and the term RLOC for the underlay locators. Regarding the LISP devices that OOR implements, currently it can operate as an xTR, LISP-MN, MS, MR, DDT Node or RTR.

Nowadays, OOR runs on desktop Linux, OpenWrt home routers and Android and iOS devices. The current reference platform for OOR development is Ubuntu Server 16.04 LTS (Xenial Xerus), OpenWrt 18.06 and Android 6.0 (Marshmallow), iOS 11.3.

OOR can work together with the Vector Packet Processing (VPP) technology to obtain an xTR capable to reach bandwith close to the 10 GBps. To use VPP as the OOR dataplane, refears to the README.vpp.md.

OpenOverlayRouter is a rename of the LISPmob.org project.

Network Prerequisites

Running a Open Overlay Router device on the public Internet requires the following:

xTR - MN

  • an EID from a Mapping Service Provider (MSP),
  • the RLOC of the Map-Server that will accept the registration of this EID,
  • an authentication token to register the EID with the Map-Server,
  • the RLOC of a Map-Resolver,
  • the RLOC of a Proxy-ETR,
  • a publicly routable RLOC for the device running OOR, which is neither firewalled, nor behind NAT (see however "NAT traversal" section for details on this).

RTR

  • the RLOC of a Map-Resolver,
  • a publicly routable RLOC for the device running OOR, which is neither firewalled, nor behind NAT.

MS - MR - DDT

  • a publicly routable RLOC for the device running OOR, which is neither firewalled, nor behind NAT.

The above information is used for configuring 'oor' via the configuration file 'oor.conf'. See section "OpenWrt" for OpenWrt configuration details,"Android" for Android configuration details and "iOS" for Apple iOS configuration.

Visit http://www.lisp4.net/ for more info on the deployment status of the LISP beta-network and how you can join the testbed.

Software Prerequisites

To build Open Overlay Router for a standard Linux, you will need:

  • a Linux hosts
  • a C compiler (tested with gcc)
  • GNU make
  • git, unless you use a tarball
  • libConfuse
  • gengetopt
  • libcap v2+
  • libzmq v3
  • libxml2

On Debian-derived Linux distributions (including Ubuntu), installing the following packages will provide all necessary dependencies:

  • 'build-essential'
  • 'git-core'
  • 'libconfuse-dev'
  • 'gengetopt'
  • 'libcap2-bin'
  • 'libzmq3-dev'
  • 'libxml2-dev'

The latest version of the Open Overlay Router source code can be obtained from Github:

git clone git://github.com/OpenOverlayRouter/oor.git

Installation

To build the code for Linux operating run the following in the top-level directory:

make 

To install it in /usr/local/sbin, run

sudo make install

A Vagrantfile is provided for quick installation in a dedicated VM, see the "Using Vagrant" section.

To build the code for OpenWrt you will need the OpenWrt official SDK. However, for your convenience, we encourage you to install the official packet from OpenWrt repository. Check section "OpenWrt" for details.

Running Open Overlay Router

Once the code is successfully installed on the device, oor.conf.example should be copied to /etc/oor.conf and edited with the proper values. Again, see section 'OpenWrt' for OpenWrt details about this. Additionally the device's interface used for physical network connectivity (such as 'eth0', 'wlan0' or 'ppp0') must also be specified in the configuration file.

Prior to execute Open Overlay Router, make sure that each external interface (such as 'wan0') has defined a default route with different 'metric' in the routing table (there is a 'default' entry for each outgoing interface). In most cases, this is auto-configured by the operating system during start-up.

Check that sysctl options configuration is correct. Make sure that rp_filter kernel network parameter is disabled. It is disabled by default in OpenWrt, but, for instance, it is enabled by default in Ubuntu. Make sure too that IP forwarding is enabled. It should be enabled by default in OpenWrt.

You can instruct your system to auto-configure these values during system boot-up if you add the following lines to /etc/sysctl.conf. Remember to reboot your system after adding these lines.

net.ipv4.conf.default.rp_filter=0
net.ipv4.conf.all.rp_filter=0
net.ipv4.ip_forward=1
net.ipv6.conf.all.forwarding=1

The user space daemon can be started by a non privileged user with the appropriate permissions (particularly CAP_NET_ADMIN and CAP_NET_RAW). Such user can run the daemon with:

oor -f /etc/oor.conf

It will set up networking and register to the mapping system, after which you can enjoy all the benefits of LISP.

Features

This is the list of supported features at this moment

  • xTR / MN

    • Register to the Mapping System
    • Request mappings
    • Reply to mapping requests
    • Encapsulate data packets (LISP and VXLAN-GPE)
    • Decapsulate data packets (LISP and VXLAN-GPE)
    • RLOC Probing (user configurable)
    • IPv6 full support (EIDs and RLOCs)
    • Interface management
    • Multihoming
    • Experimental NAT traversal
    • Explicit Locator Path (ELPs)
    • Instance ID / VNI support
    • NETCONF/YANG configurable
    • VPP support (only for IPv4 RLOCs)
    • Specify destination EID prefixes (only linux and OpenWrt)
    • Remote RLOC registration
  • RTR

    • Request mappings
    • Reply to mapping requests
    • Reencapsulate data packets (LISP and VXLAN-GPE)
    • RLOC Probing (user configurable)
    • IPv6 full support (EIDs and RLOCs)
    • Interface management
    • Multihoming
    • Explicit Locator Path (ELPs)
    • Instance ID / VNI support
    • Experimental NAT traversal
  • MS / MR

    • Process registration requests
    • Notify correct registration
    • Accept more specific entries
    • Reply to mapping requests when Proxy Relpy activated
    • Forward requests to xTRs
    • IPv6 full support (EIDs and RLOCs)
    • Interface management
    • Explicit Locator Path (ELPs)
    • Instance ID support
    • Experimental NAT traversal
    • Process DDT Map Requests
  • DDT

    • DDT authoritative sites
    • DDT delegated sites
    • Process encapsulated DDT map request
    • Generate Map Referrals
    • Instance ID / VNI support
  • DDT-MR

    • Process mapping requests and forward them to DDT root nodes
    • Process replies from DDT mapping system
    • Instance ID / VNI support

Note: OOR doesn't support overlapping local prefixes with different IIDs when operating as a XTR or MN.

Mobile Node mode (MN)

When 'oor' is running in MN mode, the EID obtained configured is associated to the 'lispTun0' virtual interface. Two /1 routes covering the full IP addresses space should appear in the routing table. These routes should be pointing to 'lispTun0' device. The following lines show an example of how 'ip addr' and 'ip route' will look like with IPv4, expect a similar output with IPv6:

$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <RLOC> brd <RLOC_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
3: lispTun0: <POINTOPOINT,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UNKNOWN qlen 500
    link/none 
    inet <EID> scope host lispTun0


$ ip route
<RLOC_Network> dev eth0  proto kernel  scope link  src <RLOC>
169.254.0.0/16 dev eth0  scope link  metric 1000
0.0.0.0/1 dev lispTun0
128.0.0.0/1 dev lispTun0
default via <RLOC_GW> dev eth0  metric 100

xTR mode

To configure Open Overlay Router to use it on x Tunnel Router (xTR) mode take into account the following considerations.

An EID /30 (at least) prefix is required for IPv4 EIDs. For IPv6 you should have a /126 (at least). This prefix should be used as the network prefix for the subnet where the hosts on the EID space connected to the router are allocated. Assign the EID to an interface on the router and configure it as you would do for a normal network prefix (static configuration, DHCP, etc...). No EID is used for the 'lispTun0' interface in router mode (a local address is automatically used by OOR instead). The following lines show an example of how 'ip addr' and 'ip route' will look like with IPv4, expect a similar output with IPv6:

$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <RLOC> brd <RLOC_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <EID1> brd <EID1_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <EID2> brd <EID2_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
5: lispTun0: <POINTOPOINT,UP,LOWER_UP> mtu 1440 qdisc pfifo_fast state UNKNOWN qlen 500
    link/none 


$ ip route
<RLOC_Network> dev eth0  proto kernel  scope link  src <RLOC>
<EID1_Network> dev eth1  proto kernel  scope link  src <EID1>
<EID2_Network> dev eth2  proto kernel  scope link  src <EID2>
default via <RLOC_GW> dev eth0  metric 100


$ ip rule
0:      from all lookup local 
x:      from <RLOC> lookup x 
99:     from all to <EID1_Network> lookup main
99:     from all to <EID2_Network> lookup main  
100:    from <EID1_Network> lookup 100
100:    from <EID2_Network> lookup 100 
32766:  from all lookup main 
32767:  from all lookup default

This output is only valid when OOR is not compiled to work with VPP.

RTR mode

When running in RTR mode, Open Overlay Router serves as a Re-encapsulating Tunnel Router that decapsulates the received traffic to reencapsulate it again towards the next hop. An RTR can also be used to provide NAT support to xTRs/MNs when it works together with a MS with NAT Traversal support.

To configure an RTR, select the corresponding operating-mode and fill the parameters of the RTR section and Tunnel Router general configuration of the configuration file. The following lines show an example of how 'ip addr' and 'ip route' will look like with IPv4, expect a similar output with IPv6:

$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <RLOC1> brd <RLOC1_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
    inet <RLOC2> brd <RLOC2_BROADCAST> scope global eth0
       valid_lft forever preferred_lft forever
4: lispTun0: <POINTOPOINT,UP,LOWER_UP> mtu 1440 qdisc pfifo_fast state UNKNOWN qlen 500
    link/none 

$ ip route
<RLOC1_Network> dev eth0  proto kernel  scope link  src <RLOC1>
<RLOC2_Network> dev eth1  proto kernel  scope link  src <RLOC2>
default via <RLOC_GW_1> dev eth0  metric 100
default via <RLOC_GW_2> dev eth1  metric 110

$ ip rule
0:      from all lookup local 
x:      from <RLOC1> lookup x 
y:     from <RLOC2> lookup y
32766:  from all lookup main 
32767:  from all lookup default

MS mode

Open Overlay Router can be configured as a basic Map Server (MS) where configured EID prefixes can be registered by xTRs. OOR will also reply to MapRequests addressed to those prefixes. MS can be associated with an RTR in order to provide NAT support to xTRs/MN.

To configure Open Overlay Router as a MS/MR, select the corresponding operating-mode and fill the parameters of the MS section of the configuration file.

DDT mode

Open Overlay Router implements the LISP Delegated Database Tree (LISP-DDT) specified in the RFC 8111. LISP-DDT is a hierarchical distributed database that embodies the delegation of authority to provide mappings from LISP EIDs to RLOCs. It is a statically defined distribution of the EID namespace among a set of LISP-speaking servers called "DDT nodes". Each DDT node is configured as "authoritative" for one or more EID-prefixes, along with the set of RLOCs for Map-Servers or "child" DDT nodes to which more-specific EID-prefixes are delegated.

To configure OOR as a DDT node, define the authoritative sites and the delegated sites. Delegated sites could be of type MAP_SERVER_DDT_NODE if the next hop is a Map Server, or CHILD_DDT_NODE if next hop is a DDT node with more-specific EID prefix information. The node authoritative for all EID space is usually called DDT ROOT node.

MR mode

A LISP Map Resolver (MR) is a node that forwards Map Requests from xTRs to the MSs responsibles of the requested EID. The MR implemented by Open Overlay Router use LISP-DDT to find the suitable MS.

To configure OOR as a MR, specify the addresses of the DDT Root nodes to be used.

Using Vagrant

The top-level directory of the tree has a Vagrantfile to allow quick creation of a VM with all prerequisites preinstalled so the code can be built quickly in an isolated environment. This is especially useful for development on platforms other than Linux, where code editing is done on the native host OS, and the Linux VM created by Vagrant is used only for building and testing the code.

Vagrant automatically sets up a shared folder /vagrant pointing to the folder where the Vagrantfile resides, in this case the top-level folder of the source tree. This way, changes to the source code on the host computer are automatically reflected in the VM, and binaries created in the VM are also automatically available to the host OS.

To create the VM, run:

vagrant up

This will create a VM called oor-dev by downloading the base box (currently Ubuntu 17.10), updating packages to the latest version, and installing build dependencies for OOR. It may be useful to install the vagrant-cachier plugin to cache Ubuntu packages, in order to speed up rebuilds of the VM, if done often:

vagrant plugin install vagrant-cachier

Once provisioning of the VM finished, it can be accessed with:

vagrant ssh

There is also a VM definition called oor-dev-android, which is not provisioned by default. It does all of the above, and in addition it creates the environment for building the Android APK. Provisioning it requires using the VM name explicitly in the vagrant up command:

vagrant up oor-dev-android

Using Dockers

Docker is a platform that is based on packaging applications in containers. It immediately improves security, reduce costs and gain cloud portability. All these improvements can be achieved without changing the original code.

The OOR can work as a Docker Container. This will allow to get the lifecycle of OOR from development to production shorter receiving and running automatically the last code of OOR from github.

Using OOR as a container can also be used to provide LISP support to other running containers in the host.

In the Docker directory you can find a README.md file with more details in how to create and use OOR as a container.

OpenWrt

To enable OpenWrt configuration mode and the specific routing operations, the code should have been compiled with the platform=OpenWrt option during OpenWrt package creation. Please note that the best way to get Open Overlay Router on OpenWrt is using the official package from OpenWrt repository or get a precompiled binary from the github website (https://github.com/OpenOverlayRouter/oor/wiki/Downloads).

In OpenWrt, the configuration is performed through the OpenWrt standard configuration tool UCI, instead of using 'oor.conf' file. Configure the UCI file manually in '/etc/config/oor' (by default), use the UCI CLI application, or use the web interface (if available). The configuration fields are analogue to those in the 'oor.conf' file.

Android

Open Overlay Router includes support for Android devices operating as LISP-MN. Please see the android/README.md file to get details on Open Overlay Router for Android installation, compilation and usage.

iOS

Open Overlay Router includes support for iOS devices operating as LISP-MN. Please see the Apple/README.md file to get details on Open Overlay Router for iOS installation, compilation and usage.

VPP

Open Overlay Router has adopted VPP as a new data plane that can be used to encapsulate and decapsulate LISP traffic in a high performance rate. Please see the VPP/README.md file to get details on how to configure OOR and VPP to work together.

NAT traversal

Since version 1.1, Open Overlay Router includes experimental NAT traversal capabilities for the modalities of xTR and MN (see LISP NAT traversal draft). In order to use NAT traversal with Open Overlay Router you will need a MS and an RTR (Re-encapsulating Tunnel Router) that are NAT traversal capable. If you are using the beta-network, please take into account that, at the time of this writing (release 1.1), not all devices on the beta-network have been updated to support NAT traversal yet.

If NAT traversal feature is enabled, Open Overlay Router is configured to send all data traffic through RTRs even if the interface has a public address. On its current form, NAT traversal support on Open Overlay Router ignores IPv6 addresses on RLOC interfaces, besides, the current NAT traversal implementation in the beta-network only supports the registration of a single EID prefix per device.

Contact

Should you have questions regarding the use of the Open Overlay Router distribution, please subscribe to the [email protected] mailing list and ask there (http://mail.openoverlayrouter.org/mailman/listinfo/users).

If you wish to participate in the development of Open Overlay Router, use the dedicated mailing list, [email protected] (http://mail.openoverlayrouter.org/mailman/listinfo/devel).

Additionally, important announcements are sent to the low volume mailing list [email protected] (http://mail.openoverlayrouter.org/mailman/listinfo/announce).

More interactive help can sometimes be obtained on the '#openoverlayrouter' IRC channel on FreeNode.

Bugs you encounter should be filed at the repository's issue tracker on Github.