Skip to content

avian2/eagle-automation

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

42 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Eagle automation
================

Eagle automation provides a more Unix-like and scriptable interface to the
CadSoft Eagle electronics design package. It is meant to make open hardware
development a bit more convenient for anyone that is used to the procedures
usually employed by open source software projects (for example using source
control tools and one-step builds).

Note these scripts have only been tested using Eagle 5.11.0. If you are using a
newer version of Eagle, you might want to try Guyzmo's largely refactored and
updated fork at https://github.com/guyzmo/eagle-automation

This repository currently contains the following:

eaglediff     - Commandline diff tool for schematics, board layouts and
		libraries that is compatible with git-difftool.

		For schematics and board layouts, a visual diff is
		displayed.

		For libraries, a textual comparison of library elements is
		shown.

eagleexport   - A tool that exposes a unified commandline interface to various
                different ways Eagle offers for exporting artwork.

                It currently supports exporting Eagle files to Gerber, PDF and
                PNG formats, generating Excellon drill files and files needed
                for pick & place machines.

eagledrl      - Generate .drl files from .dri without any annoying dialogs.

skel/Makefile - An example Makefile that demonstrates how fabrication and
                assembly documentation for a project can be generated
                automatically with GNU Make.



Installation
============

Run:

$ python setup.py install
$ git config --global --add difftool.eaglediff.cmd 'eaglediff $LOCAL $REMOTE'



Usage
=====

You can find a Makefile in the skel/ subdirectory that shows how you can
automatically build your project's documentation using make from .sch and
.brd files.

To show differences to the design that have not yet been committed:

$ git difftool -t eaglediff

To show differences between two tagged versions:

$ git difftool -t eaglediff v1.0..v2.0

Note that Eagle windows will blink on and off during the use of these
tools. Try not to touch anything while they are doing that. 

Also, Eagle sometimes behaves weirdly if more than one instance of it is
running: it might occasionally stop in the middle of a script or throw a
random error dialog. Because of the closed nature of this software there is
nothing that can be done about that. If that bothers you, consider
switching to a free EDA tool.



Configuration
=============

These tools make a distinction between "export layers" (e.g. layer names
used on the eagleexport command line) and "Eagle layers" (layer names as they
appear in the Eagle user interface). One export layer typically corresponds to
one mask and consists of one or more Eagle layers.

For example "topcopper" export layer by default includes "Top", "Pads" and
"Vias" Eagle layers.

A configuration file provides a mapping between export layers and Eagle layers
and some other tweakable settings. Default configuration is installed by
setup.py. It should work for most simple one- or two-layer boards.

Should you want to adjust something, you can place your own configuration file
to one of the following locations. Settings in later locations override earlier
ones:

	/etc/eagle_automation.conf
	$HOME/.config/eagle_automation.conf
	./eagle_automation.conf

You can use the 'eagle_automation/default.conf' file as a template.



Known problems
==============

When exporting to PDF using eagleexport, default print settings are used.
To set them, go to File -> Print setup, make changes, then quit Eagle so
that the settings are saved.

Exporting and diffing multi-page schematics doesn't work well. Only one page
can be compared at a time and you have to specify the page number on the
command line using --page.



License
=======

Eagle automation, set of commandline tools for use with CadSoft Eagle
Copyright (C) 2014  Tomaz Solc <[email protected]>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

About

Set of commandline tools for use with CadSoft Eagle

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published