Skip to content

Linux Live Image with the tool to bring the NWA55AXE back into Setup Mode

Notifications You must be signed in to change notification settings

freifunk-darmstadt/network-setup-mode-trigger-os

Repository files navigation

network-setup-mode-trigger-os

Usage

  1. Downaload the provided ISO
  2. Copy it onto an USB Stick (for example https://etcher.balena.io/ could be used)
  3. Interrupt your normal Boot and instead boot from the USB
  4. once booted type sudo send-network-request eth0 to start sending the reset packages on the specified interface
  5. connect the wired Network Port of your PC to the unpowered side of an PoE Injector (please do at least a tripple check)
  6. connect your AP to the powered side of the PoE Injector, wait a few seconds
  7. press Ctrl+C to abort sending the packages
  8. (optional) after a while you should be able to ssh into your device with ssh [email protected]. You can terminate the connection with exit
  9. type "sudo systemctl poweroff" to turn your PC off
  10. remove the USB stick and start your PC as you normaly would
  11. until the AP loses power it's in the Setup/Config Mode and can be accessed as any other Freifunk Router via 192.168.1.1

About

Linux Live Image with the tool to bring the NWA55AXE back into Setup Mode

Resources

Stars

Watchers

Forks

Languages