[gree] Use GCM encryption when bind fails

[lovery]

Change the encryption mode to GCM if different when binding to AC device fails with SocketTimeoutException and try again. Detect if device version is bigger than or equal to 2 and set encryption to GCM

Fixes #16911

Additional info:

There are gree devices that on scan request responds with package encrypted with ECB encryption using the old key, but expects GCM encryption bind request in response. Such behavior is described in #16911
Also in openhab community forum a few people are saying that they have the same problem.

Not sure which approach is better to change the encryption mode to GCM when SocketTimeoutException was catched and try again or try to determine is the AC expects GCM encryption bind request base on the value of ver property of the scan response, so I am leaving them both and I am open to suggestion.

Testing

Builded jar file can be found here.

[lsiepel]

Some minor typo's.
Would be nice if @markus7017 can comment on the functionality.

[lovery]

@lsiepel Thank you for noticing my typo's I didn't pay so much attention to the debug messages, because I was thinking that may be there are a bit too much, but I wanted to keep them for testing purposes until some of the people reporting the problem test the change

[lsiepel]

Would be nice if @markus7017 can comment

[gliter]

For old Gree device there is an exception thrown, which is strange since it fails before your code change.
It is working correctly on addon from version 4.2.0

RuntimeException
java.lang.NumberFormatException: For input string: "V1."
        at java.lang.NumberFormatException.forInputString(NumberFormatException.java:67) ~[?:?]
        at java.lang.Integer.parseInt(Integer.java:668) ~[?:?]
        at java.lang.Integer.parseInt(Integer.java:786) ~[?:?]
        at org.openhab.binding.gree.internal.GreeCryptoUtil.getEncryptionType(GreeCryptoUtil.java:97) ~[?:?]
        at org.openhab.binding.gree.internal.handler.GreeAirDevice.<init>(GreeAirDevice.java:81) ~[?:?]
        at org.openhab.binding.gree.internal.discovery.GreeDeviceFinder.scan(GreeDeviceFinder.java:117) ~[?:?]
        at org.openhab.binding.gree.internal.handler.GreeHandler.initializeThing(GreeHandler.java:111) ~[?:?]
        at org.openhab.binding.gree.internal.handler.GreeHandler.lambda$1(GreeHandler.java:364) ~[?:?]
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:539) [?:?]
        at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:305) [?:?]
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:305) [?:?]
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136) [?:?]
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635) [?:?]
        at java.lang.Thread.run(Thread.java:840) [?:?]

[gliter]

I see you are also an author that implemented GreeCryptoUtil. Seems there have to be something strange with DTO mapping.

The response for scan package I had received from Gree device was:

{"t":"dev","cid":"<Redacted MAC>","bc":"000000000000000000000000000000","brand":"gree","catalog":"gree","mac":"<Redacted MAC>","mid":"10001","model":"gree","name":"<partial MAC>","series":"gree","vender":"1","ver":"V1.2.1","lock":0}

The only V1 occurence here is in ver field which judging from exception it looks like it is trying to put it to some integer field. No idea why.

[gliter]

I see same problem is for new gree device:

2024-09-23 19:44:34.326 [DEBUG] [.internal.discovery.GreeDeviceFinder] - Response received from address 10.0.20.111: {"t":"dev","cid":"","bc":"00000000000000000000000000000000","brand":"gree","catalog":"gree","mac":"<redacted>","mid":"10001","model":"gree","name":"","lock":0,"series":"gree","vender":"1","ver":"V3.2.M","hid":"362001068254+U-4MWB65VRV2.08.bin","ModelType":"16752730"}
2024-09-23 19:44:34.356 [WARN ] [ernal.discovery.GreeDiscoveryService] - Discovery: Device Discovery failed: RuntimeException
java.lang.NumberFormatException: For input string: "V3."
        at java.lang.NumberFormatException.forInputString(NumberFormatException.java:67) ~[?:?]
        at java.lang.Integer.parseInt(Integer.java:668) ~[?:?]
        at java.lang.Integer.parseInt(Integer.java:786) ~[?:?]
        at org.openhab.binding.gree.internal.GreeCryptoUtil.getEncryptionType(GreeCryptoUtil.java:97) ~[?:?]
        at org.openhab.binding.gree.internal.handler.GreeAirDevice.<init>(GreeAirDevice.java:81) ~[?:?]
        at org.openhab.binding.gree.internal.discovery.GreeDeviceFinder.scan(GreeDeviceFinder.java:117) ~[?:?]
        at org.openhab.binding.gree.internal.discovery.GreeDiscoveryService.startScan(GreeDiscoveryService.java:90) ~[?:?]
        at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:539) [?:?]
        at java.util.concurrent.FutureTask.run(FutureTask.java:264) [?:?]
        at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:304) [?:?]
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136) [?:?]
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635) [?:?]
        at java.lang.Thread.run(Thread.java:840) [?:?]

[lsiepel]

@gliter Please confirm this issue is introduced by this PR by using a 4.3.0M1 (or snapshot) version of the binding and see if that has the same issue or not. Otherwise it would be a regression or atleast a new unrelated bug, that should be recorded in a seperate issue (and PR)

Edit: I can't related this PR with the version exception.

[lovery]

@gliter @lsiepel
It looks like I had a bug in the previous version of the PR, where I was checking the version in the response of the device. I already remove this code, because I came across a log from a device with version later than 2 and using the old encryption.
And it looks like I forgot to update the upload jar file for test. I will upload a new one tomorrow, or if @gliter can build one from the changed code it will be great 😃

[lovery]

@gliter Thank you for testing! Can you try this jar and let me know how it goes?

[grzegorz-liter-getindata]

@lovery thank you for quick explanation. Yes I will test it in the evening (UTC+2 timezones).

[gliter]

@lovery unfortunetly it doesn't seem to work. It does discover the device and there are no more logs (on trace or higher level)
I don't see this log:

 logger.debug("Unable to bind to device - changing the encryption mode to GCM and trying again", e);

so I guess it still hangs on clientSocket.send(sendPacket);

Maybe instead of fallback to GCM the encryption type could be an option to be set in .things file?

[lovery]

@gliter Thank you for your help, I really appreciate it! Can you try again, I've uploaded a new version of the jar file?
It turn out that the clientSocket.send function doesn't throw an exception for timeout, so I moved the code for changing the encryption type to the already existing catch.
I will also check how I can implement your suggestion, it is a good proposition.

[gliter]

@lovery initially had some issues but it turned out the device was disabled in my OpenHab UI, even thou I configure everythng in files.
Anyway becasue of that I thought there is still problem with changing encryption by connetion timeout so I wrote some implementation to add it to config.

Feel free to incorporate it in your PR:
Patch: https://gist.github.com/gliter/22216484effe2fed53cc73829010d450
or PR: lovery#1

Probably some documentation have to be updated as well.

With those changes I was able to connect to new Gree device.